CPU

Intel® Core™ processor dual core i5-4300U, 1.9GHz

Memory

2 channel 204-pin DDR3L SO-DMIM socket support 1333/1600MHz up to 16GB, default 2GB

Storage

2 x 2.5" SATA 3.0 SSD/HDD (externally accessible), RAID 0,1 supported (optional lockable storage available)

1 x CFast (externally accessible)

Expansion

1 x full size Mini-PCIe socket (USB 2.0)

1 x full size Mini-PCIe socket (USB 2.0 + PCIe)

1 x full size Mini-PCIe socket (USB 2.0 + PCIe)

1 x half size Mini-PCIe socket (USB 2.0 + PCIe)

Function

1 x default U-blox UBX-G6010 GPS module (50-channel and GALIELO) or optional modules with Dead Reckoning or GLONASS support

Built-in G-sensor

I/O Interface-Front

4 x LED for power, storage, WWAN, WLAN

2 x externally accessible SATA 3.0 SSD/HDD tray, RFID 0, 1 supported (optional lockable storage available)

1 x dual USB type A connector for USB 3.0 port + USB 2.0 port

2 x externally accessible SIM card socket (selectable)

1 x phone jack 3.5mm for 1 x Mic-In

1 x phone jack 3.5mm for 1 x Line-Out

1 x externally accessible CFast card socket with cover1 x event button (trigger type)

1 x reset button

3 x antenna hole for WWAN/WLAN/BT

I/O Interface-Rear

1 x 9~36VDC input with ignition and 36W typical power consumption

1 x dual USB type A connector for USB 3.0 port + USB 2.0 port

2 x RJ45 10/100/1000 Fast Ethernet with LED

1 x phone jack 3.5mm for 1 x Mic-In

1 x phone jack 3.5mm for 1 x Line-Out with 1.5W output each

1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz

1 x DP port. Resolution up to 2560 x 1600 @60Hz

2 x DB-9 RS-232

1 x DB-9 RS-232/422/485 (RI/5V/12V selectable)

1 x DB-9 for CAN 2.0B (optional CAN Bus 2.0B Mini-PCIe card), 2 x MCU-DI and 2 x MCU-DO

1 x 16-pin terminal block

1 x CAN Bus 2.0B (on board)

1 x optional OBDII module (ASE J1939 or J1708)

8 x Programmable GPIO
(Digital Input)
Input voltage (internal type): 5VDC TTL (default)
Input voltage (source type): 3~12VDC
(Digital Output)
Digital Output (sink type): 5VDC TTL (default), max current: 20mA
Digital Output (source type): 3~24VDC, max current: 150mA

1 x 12VDC output (2A), SM Bus

4 x antenna hole for WWAN/ WLAN/ BT/GPS

1 x Fuse (15A)

Power Management

Selectable boot-up & shut-down voltage for low power protection by software

Setting 8-level power on/off delay time by software

Status of ignition and low voltage can be detected by software

Support S3/S4 suspend mode

Operating System

Windows 8, WES8

Window 7, WES7

Linux kernel 3.X

Dimensions

260 mm (W) x 206 mm (D) x 79.5 mm (H) (10.24" x 8.11" x 3.13")

Weight: 2.5kg

Environment

Operating temperatures:
-30°C to 50°C (w/ industrial SSD) with air flow
-20°C to 45°C (w/ commercial HDD) with air flow

Storage temperatures: -35°C to 85°CR

elative humidity: 10% to 90% (non-condensing)

Vibration (random): 1.5g@5~500 Hz (in operation, HDD), 2g@5~500Hz (in operation, SSD)

Vibration (SSD/HDD): 
Operating : MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test

Shock (SSD/HDD):
Operating : MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g

Standards/Certifications

CE approval

FCC Class B

E13 Mark